The pull-out Sennen: the same hard right-angled chrome spout as the standard mixer, with a nozzle that draws out of the spout on a hose. That is the version to buy if you rinse a lot — filling a bucket on the floor, washing down a double bowl, rinsing salad without moving it under the tap.
Because the head withdraws from a rigid spout rather than hanging on an exposed spring coil, it keeps the clean, squared-off look of the rest of the range when it is not in use. One lever controls temperature and flow, the spout swivels across the bowl, and the aerator is a replaceable part rather than sealed in — so limescale is a service job, not a new tap.
Pressure — please read. Howdens list this tap as Suitable for High Pressure Systems with a water pressure range of 1.0-5.5bar. Both figures are reproduced below exactly as they publish them. Treat it as a mains-pressure tap: if your supply is gravity-fed or you are unsure what pressure you have, contact us before ordering rather than assuming the lower end of that range will do.
Specification
- Collection: Sennen
- Model Number: TAP6106
- Colour Description: Chrome
- Finish: Polished
- Product Type: Pull Out
- Shape: Right Angled
- Handle Type: Single Lever
- Flow Type: Single Flow
- Spout Type: Swivel
- Tap Turn Operation: ¼ Turn Lever
- Tap Valve: Ceramic Disc Cartridge
- Aerator Type: Replaceable Aerator
- Water Flow Type: Neoperl Honeycomb
- Connection Type: ½" BSP Male and Female Thread
- Pressure Suitability: Suitable for High Pressure Systems
- Water Pressure Range: 1.0-5.5bar
- Height: 312mm
- Depth: 290mm
- Spout Reach: 240mm
- Weight (Without Packaging): 2.277kg
- Supplied With: Fixings, Instruction Manual
Howdens do not publish a length for the pull-out hose itself — the 365mm figure below is the supply tail, not the spray hose. Ask us if the reach of the pull-out head is critical for your layout and we will chase the figure.
Installation
- Mount Type: Surface Mounted
- Maximum Sink and Worktop Thickness: 50mm
- Tap Footprint: 54mm
- Tail Pipe Type: Flexi Tails
- Tap Hose Length: 365mm
Fixings and an instruction manual are supplied. No waste kit is included.
Guarantee
- 5 Year Manufacturer's Guarantee
- 2 Year Guarantee Against Surface Finish
- CE Marked
- Water Supply (Water Fittings) Regulations 1999
The surface-finish guarantee on this model is stated as two years, where the rest of the Sennen range is one. That is what Howdens publish for this code.
Only available through the trade — or through us. Howdens supplies trade accounts only, so this tap cannot be bought direct from them without one. We can get it to you without an account.
